RoboBlockly for Learning Coding and Math with Robots

0x2418126-6-12y2418126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant
Units: US Customary Metric
Background:

Robot 1

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Function: Creating a Square
Problem Statement:
The createSquare function will draw a square with side lengths of 4, centered on a specific ordered pair. Use the createSquare function to draw two squares one centered at (3, 3) and the other centered at (9, 12). For a challenge add trace blocks to only have the robot draw the two squares without any other marks on the grid.
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.69;
int count;

// Describe this function...
void createSquare() {
  robot.traceOff();
  robot.driveDistance(2, radius);
  robot.turnRight(90, radius, trackwidth);
  robot.traceOn();
  count = 0;
  while(count < 4) {
    robot.driveDistance(2, radius);
    robot.turnRight(90, radius, trackwidth);
    robot.driveDistance(2, radius);
    count = count + 1;
  }
}

robot.traceOff();
robot.drivexyTo(3, 3, radius, trackwidth);
createSquare();
robot.traceOff();
robot.drivexyTo(9, 12, radius, trackwidth);
createSquare();
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace

		
Time
Problem Statement:
The createSquare function will draw a square with side lengths of 4, centered on a specific ordered pair. Use the createSquare function to draw two squares one centered at (3, 3) and the other centered at (9, 12). For a challenge add trace blocks to only have the robot draw the two squares without any other marks on the grid.