RoboBlockly for Learning Coding and Math with Robots

0x2418126-6-12y2418126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant
Units: US Customary Metric
Background:

Robot 1

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Modeling Linear Relations in the Coordinate Plane
Problem Statement:
Change the initial position of the robot using the command window in the lower left hand side (under the Coordinate Plane). Change the initial position of the robot so it starts 8 units to the left and 4 units down. Set the robot's speed to 3 units per second and then drive the robot to y = 12.
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

robot.setSpeed(3, radius);
robot.driveDistance(16, radius);
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace

		
Time
Problem Statement:
Change the initial position of the robot using the command window in the lower left hand side (under the Coordinate Plane). Change the initial position of the robot so it starts 8 units to the left and 4 units down. Set the robot's speed to 3 units per second and then drive the robot to y = 12.